{Who USB Mass Storage SSS6697 B7}14 15

DOWNLOAD === https://urllio.com/2tyQZB

How to Repair a USB Flash Drive with SSS6697 B7 Controller

If you have a USB flash drive that is not recognized by your computer or has a corrupted file system, you may need to repair it using a special tool. One of the common controllers used in USB flash drives is the SSS6697 B7 from Solid State Systems. This controller supports various flash memory chips from Toshiba, such as TC58TVG5T2JTA00 and TC58TEG5T2JTA00.

In this article, we will show you how to use the 3S USB Mass Production Utility to fix your USB flash drive with SSS6697 B7 controller. This utility can format, partition, and update the firmware of your USB flash drive. However, before you proceed, please note that this process will erase all the data on your USB flash drive, so make sure you have a backup of your important files.

Steps to Repair a USB Flash Drive with SSS6697 B7 Controller

Download the 3S USB Mass Production Utility from here. Extract the zip file and run the MPALL_F1_9000_v372_0B.exe file as administrator.

Connect your USB flash drive to your computer. The utility should detect it and show its information in the main window. If not, click on the Refresh button.

Select your USB flash drive from the list and click on the Start button. The utility will scan your USB flash drive and show its details in a new window.

Click on the Settings button and choose the appropriate settings for your USB flash drive. You can select the partition type, file system, capacity, and firmware version. You can also enable or disable some features such as LED blink, write protection, and serial number.

Click on the OK button to save your settings and return to the main window. Click on the Start button again to begin the formatting process. Wait until it is completed and then click on the Exit button.

Disconnect your USB flash drive and reconnect it to your computer. It should be recognized as a new device and ready to use.

Congratulations! You have successfully repaired your USB flash drive with SSS6697 B7 controller using the 3S USB Mass Production Utility. You can now store your files on it or use it for other purposes.

Troubleshooting Tips for USB Flash Drive with SSS6697 B7 Controller

Sometimes, you may encounter some problems when using your USB flash drive with SSS6697 B7 controller. Here are some common issues and how to solve them:

If your USB flash drive is not detected by the 3S USB Mass Production Utility, try to use a different USB port or a different computer. Make sure your USB flash drive is not physically damaged or infected by malware.

If your USB flash drive is detected but shows a wrong capacity or an unknown flash chip, try to update the firmware of your USB flash drive using the 3S USB Mass Production Utility. You can download the latest firmware from here. Select the appropriate firmware for your flash chip and follow the instructions in the utility.

If your USB flash drive is formatted but still not recognized by your computer or shows an error message, try to format it again using a different file system or partition type. You can also use a third-party tool such as EaseUS Partition Master Free to format your USB flash drive.

If your USB flash drive is write-protected and you cannot modify or delete any files on it, try to disable the write protection feature using the 3S USB Mass Production Utility. You can also use a registry tweak or a command prompt to remove the write protection. You can find more details on how to do that here.

If none of these tips work for you, you may need to contact the manufacturer of your USB flash drive or seek professional help. Your USB flash drive may have a hardware failure or a corrupted controller that cannot be fixed by software. 061ffe29dd